跳至內容

使用者:Richard923888/DC15工作區/工程/絲網印刷

維基百科,自由的百科全書
圖為絲印設計的例子

絲網印刷(Screen printing)是一種印刷技術,使用絲網將除版面模子不透油墨的區域外的油墨轉印到基質上。絲網印刷使用葉片或刮刀在螢幕上刮動,從而把墨水從網眼孔流出,然後反向刮動使油墨沿著接觸區域接觸基板,使墨水完全潤濕基板後拉出絲網,便完成印刷。

絲網印刷也是印刷工業中一種常見的模版製作方法,使用在聚酯或其它網格較細的篩網上,其中空白區域塗覆有不可滲透的物質。油墨通過刮刀或刮板刮動被迫入網孔,並且通過潤濕基底,在刮板衝程期間轉印到基板表面上。當網格拿走時,墨水會保留在基板上。它也被稱為絲印(silk-screen),絹印(serigraphy)和網版印刷(serigraph printing)。絲網一次只能列印一種顏色,因此要使用多個網格來印刷多彩圖像或設計。

絲網印刷有多個不同術語名稱。傳統上,該方法被稱為網版印刷(screen printing)或絲網印刷(silkscreen printing),因為在聚酯網發明前是之前使用絲印作印刷方法的。目前,絲網印刷通常會使用合成絲線。一般使用的網格是由聚酯製成的。在一些特殊用途下,會使用尼龍或不銹鋼作網格材料。網格尺寸可以跟隨成品設計的外觀而變更。

歷史

[編輯]

Screen printing first appeared in a recognizable form in China during the Song Dynasty (960–1279 AD).[1][2] It was then adapted by other Asian countries like Japan, and was furthered by creating newer methods.

Screen printing was largely introduced to Western Europe from Asia sometime in the late 18th century, but did not gain large acceptance or use in Europe until silk mesh was more available for trade from the east and a profitable outlet for the medium discovered.

Early in the 1910s, several printers experimenting with photo-reactive chemicals used the well-known actinic light–activated cross linking or hardening traits of potassium, sodium or ammonium chromate and dichromate chemicals with glues and gelatin compounds. Roy Beck, Charles Peter and Edward Owens studied and experimented with chromic acid salt sensitized emulsions for photo-reactive stencils. This trio of developers would prove to revolutionize the commercial screen printing industry by introducing photo-imaged stencils to the industry, though the acceptance of this method would take many years. Commercial screen printing now uses sensitizers far safer and less toxic than bichromates. Currently there are large selections of pre-sensitized and "user mixed" sensitized emulsion chemicals for creating photo-reactive stencils.[3]

A group of artists who later formed the National Serigraphic Society coined the word Serigraphy in the 1930s to differentiate the artistic application of screen printing from the industrial use of the process.[4] "Serigraphy" is a compound word formed from Latin "sēricum" (silk) and Greek "graphein" (to write or draw).[5]

The Printers' National Environmental Assistance Center says "Screenprinting is arguably the most versatile of all printing processes."[6] Since rudimentary screenprinting materials are so affordable and readily available, it has been used frequently in underground settings and subcultures, and the non-professional look of such DIY culture screenprints have become a significant cultural aesthetic seen on movie posters, record album covers, flyers, shirts, commercial fonts in advertising, in artwork and elsewhere.

20世紀60年代至今

[編輯]

Credit is generally given to the artist Andy Warhol for popularising screen printing as an artistic technique, identified as serigraphy, in the United States. Warhol was supported in his production by master Screen Printer Michel Caza,[7] a founding member of Fespa, and is particularly identified with his 1962 depiction of actress Marilyn Monroe, known as the Marilyn Diptych, screen printed in garish colours.

Sister Mary Corita Kent, gained international fame for her vibrant serigraphs during the 1960s and 1970s. Her works were rainbow colored, contained words that were both political and fostered peace and love and caring.

American entrepreneur, artist and inventor Michael Vasilantone started to use, develop, and sell a rotatable multicolour garment screen printing machine in 1960.[來源請求] Vasilantone later filed for patent[8] on his invention in 1967 granted number 3,427,964 on February 18, 1969.[8] The original machine was manufactured to print logos and team information on bowling garments but soon directed to the new fad of printing on T-shirts. The Vasilantone patent was licensed by multiple manufacturers, the resulting production and boom in printed T-shirts made this garment screen printing machine popular. Screen printing on garments currently accounts for over half of the screen printing activity in the United States.[9]

Graphic screenprinting is widely used today to create mass or large batch produced graphics, such as posters or display stands. Full colour prints can be created by printing in CMYK (cyan, magenta, yellow and black ('key')).

Screen printing lends itself well to printing on canvas. Andy Warhol, Arthur Okamura, Robert Rauschenberg, Roy Lichtenstein, Harry Gottlieb and many other artists have used screen printing as an expression of creativity and artistic vision.

列印技術

[編輯]
絲網印刷機通常會使用Screenstretch的網版來印刷,鉸鏈夾橡膠刮板來固定及列印。可使用橡膠刮板將墨水從網格列印出來,鉸鏈夾將網版固定在適當位置,便於印刷。
A.墨水 B.刮刀 C.圖像設計 D.光乳劑 E.網版 F.列印圖像
絲網印刷步驟
一幅彩色的設計需要使用多個不同顏色的網版
圖中為固定台,用於列印時的固定
手推車的物品是木製橡皮刮板和丙烯酸墨水

A screen is made of a piece of mesh stretched over a frame. The mesh could be made of a synthetic polymer, such as nylon, and a finer and smaller aperture for the mesh would be utilized for a design that requires a higher and more delicate degree of detail. For the mesh to be effective, it must be mounted on a frame and it must be under tension. The frame which holds the mesh could be made of diverse materials, such as wood or aluminum, depending on the sophistication of the machine or the artisan procedure. The tension of the mesh may be checked by using a tensiometer; a common unit for the measurement of the tension of the mesh is Newton per 厘米 (N/cm).

A stencil is formed by blocking off parts of the screen in the negative image of the design to be printed; that is, the open spaces are where the ink will appear on the substrate.

Before printing occurs, the frame and screen must undergo the pre-press process, in which an emulsion is 'scooped' across the mesh and the 'exposure unit' burns away the unnecessary emulsion leaving behind a clean area in the mesh with the identical shape as the desired image. The surface to be printed (commonly referred to as a pallet) is coated with a wide 'pallet tape'. This serves to protect the 'pallet' from any unwanted ink leaking through the screen and potentially staining the 'pallet' or transferring unwanted ink onto the next substrate. Next, the screen and frame are lined with a tape. The type of tape used in for this purpose often depends upon the ink that is to be printed onto the substrate. These aggressive tapes are generally used for UV and water-based inks due to the inks' lower viscosities. The last process in the 'pre-press' is blocking out any unwanted 'pin-holes' in the emulsion. If these holes are left in the emulsion, the ink will continue through and leave unwanted marks. To block out these holes, materials such as tapes, speciality emulsions and 'block-out pens' may be used effectively.

The screen is placed atop a substrate. Ink is placed on top of the screen, and a floodbar is used to push the ink through the holes in the mesh. The operator begins with the fill bar at the rear of the screen and behind a reservoir of ink. The operator lifts the screen to prevent contact with the substrate and then using a slight amount of downward force pulls the fill bar to the front of the screen. This effectively fills the mesh openings with ink and moves the ink reservoir to the front of the screen. The operator then uses a squeegee (rubber blade) to move the mesh down to the substrate and pushes the squeegee to the rear of the screen. The ink that is in the mesh opening is pumped or squeezed by capillary action to the substrate in a controlled and prescribed amount, i.e. the wet ink deposit is proportional to the thickness of the mesh and or stencil. As the squeegee moves toward the rear of the screen the tension of the mesh pulls the mesh up away from the substrate (called snap-off) leaving the ink upon the substrate surface.

There are three common types of screen printing presses. The 'flat-bed', 'cylinder', 'rotary'.[6][10]

Textile items printed with multicoloured designs often use a wet on wet technique, or colours dried while on the press, while graphic items are allowed to dry between colours that are then printed with another screen and often in a different colour after the product is re-aligned on the press.

Most screens are ready for re-coating at this stage, but sometimes screens will have to undergo a further step in the reclaiming process called dehazing. This additional step removes haze or "ghost images" left behind in the screen once the emulsion has been removed. Ghost images tend to faintly outline the open areas of previous stencils, hence the name. They are the result of ink residue trapped in the mesh, often in the knuckles of the mesh (the points where threads cross).[11]

While the public thinks of garments in conjunction with screen printing, the technique is used on tens of thousands of items, including decals, clock and watch faces, balloons, and many other products. The technique has even been adapted for more advanced uses, such as laying down conductors and resistors in multi-layer circuits using thin ceramic layers as the substrate.

振動技術(Stencilling techniques)

[編輯]
圖中顯示模板覆蓋絲網的宏觀照片。油墨會被印刷在模板不覆蓋的地方。

A method of stencilling that has increased in popularity over the past years is the photo emulsion technique:

Hand-painted colour separation on transparent overlay by serigraph printer Csaba Markus
  1. The original image is created on a transparent overlay, and the image may be drawn or painted directly on the overlay, photocopied, or printed with a computer printer, but making so that the areas to be inked are not transparent. A black-and-white positive may also be used (projected onto the screen). However, unlike traditional plate-making, these screens are normally exposed by using film positives.
  2. A screen must then be selected. There are several different mesh counts that can be used depending on the detail of the design being printed. Once a screen is selected, the screen must be coated with emulsion and put to dry in a dark room. Once dry, it is then possible to burn/expose the print.
  3. The overlay is placed over the screen, and then exposed with a light source containing ultraviolet light in the 350-420 nanometer spectrum.
  4. The screen is washed off thoroughly. The areas of emulsion that were not exposed to light dissolve and wash away, leaving a negative stencil of the image on the mesh.

Another advantage of screen printing is that large quantities can be produced rapidly with new automatic presses, up to 1800 shirts in one hour.[12] The current speed loading record is 1805 shirts printed in one hour, documented on 18 February 2005. Maddie Sikorski of the New Buffalo Shirt Factory in Clarence, New York, set this record at the Image Wear Expo in Orlando, Florida, using a 12-colour M&R Formula Press and an M&R Passport Automatic Textile Unloader. The world speed record represents a speed that is over four times the typical average speed for manual loading of shirts for automated screen printing.[9]

物料

[編輯]
魚子醬珠
魚子醬珠是以設計形狀印刷的膠水,然後施加小塑料珠 - 與固體塊區域一起使用,形成有趣的觸覺表面。
A caviar bead is a glue that is printed in the shape of the design, to which small plastic beads are then applied – works well with solid block areas creating an interesting tactile surface.
開裂油墨 (Cracking ink)
破裂墨水的作用是當油墨在乾燥後產生有意的裂紋表面時。
Screen printing four layers on a hand bench
Cracking ink effect is when the ink produces an intentional cracked surface after drying.
排墨
Discharge ink is used to print lighter colours onto dark background fabrics, they work by removing the dye of the garment – this means they leave a much softer texture. The cons with this process is that they are less graphic in nature than plastisol inks, and exact colours are difficult to control. One of the pros of using this process is they are especially good for distressed prints and under-basing on dark garments that are to be printed with additional layers of plastisol. It adds variety to the design or gives it that natural soft feel.
膨脹油墨 (puff)
Expanding ink, or puff, is an additive to plastisol inks which raises the print off the garment, creating a 3D feel and look to the design. Mostly used when printing on apparel.
植絨
Flocking consists of a glue printed onto the fabric and then flock material is applied for a velvet touch.
Foil
Foil is much like flock, but instead of a velvet touch and look it has a reflective/mirror look to it. Although foil is finished with a heat press process it needs the screen printing process in order to add the adhesive glue onto the material for the desired logo or design.
印刷四分色模式
Four-colour process is when the artwork is created and then separated into four colours (CMYK) which combine to create the full spectrum of colours needed for photographic prints. This means a large number of colours can be simulated using only 4 screens, reducing costs, time, and set-up. The inks are required to blend and are more translucent, meaning a compromise with vibrancy of colour.
Glitter/Shimmer
Glitter or Shimmer ink is when metallic flakes become an additive in the ink base to create this sparkle effect. Usually available in gold or silver but can be mixed to make most colours.
光澤(Gloss)
Gloss ink is when a clear base laid over previously printed inks to create a shiny finish.
金屬質感(Metallic)
Metallic ink is similar to glitter, but smaller particles suspended in the ink. A glue is printed onto the fabric, then nano-scale fibers applied on it. This is often purchased already made.
鏡面銀(Mirrored silver)
Mirrored silver is a highly reflective, solvent-based ink.
Nylobond
Nylobond is a special ink additive for printing onto technical or waterproof fabrics.
塑料溶膠
Plastisol is the most common ink used in commercial garment decoration. Good colour opacity onto dark garments and clear graphic detail with, as the name suggests, a more plasticized texture. This print can be made softer with special additives or heavier by adding extra layers of ink. Plastisol inks require heat (approx. 150 °C (300 °F) for many inks) to cure the print.
PVC和鄰苯二甲酸酯
PVC and Phthalate Free is relatively new breed of ink and printing with the benefits of plastisol but without the two main toxic components. It also has a soft texture.
絨面油墨
Suede ink is a milky coloured additive that is added to plastisol. With suede additive you can make any color of plastisol have a suede feel. It is actually a puff blowing agent that does not bubble as much as regular puff ink. The directions vary from manufacturer to manufacturer, but generally up to 50% suede can be added to normal plastisol.
水性油墨
these penetrate the fabric more than the plastisol inks and create a much softer feel. Ideal for printing darker inks onto lighter coloured garments. Also useful for larger area prints where texture is important. Some inks require heat or an added catalyst to make the print permanent.
高建(High Build)
High Build is a process which uses a type of varnish against a lower mesh count with many coats of emulsion or a thicker grade of emulsion (e.g., Capillex®). After the varnish passes through to the substrate, an embossed-appearing, 'raised' area of varnish is created. When cured at the end of the process, the varnish yields a Braille effect, hence the term 'High Build'.

多功能性

[編輯]
Screen with exposed image ready to be printed.

Screen printing is more versatile than traditional printing techniques. The surface does not have to be printed under pressure, unlike etching or lithography, and it does not have to be planar. Different inks can be used to work with a variety of materials, such as textiles, ceramics,[13] wood, paper, glass, metal, and plastic. As a result, screen printing is used in many different industries, including:

半導體材料

[編輯]

In screen printing on wafer-based solar photovoltaic (PV) cells, the mesh and buses of silver are printed on the front; furthermore, the buses of silver are printed on the back. Subsequently, aluminum paste is dispensed over the whole surface of the back for passivation and surface reflection.[15] One of the parameters that can vary and can be controlled in screen printing is the thickness of the print. This makes it useful for some of the techniques of printing solar cells, electronics etc.

Solar wafers are becoming thinner and larger, so careful printing is required to maintain a lower breakage rate, though high throughput at the printing stage improves the throughput of the whole cell production line.[15]

絲印機

[編輯]

To print multiple copies of the screen design on garments in an efficient manner, amateur and professional printers usually use a screen printing press. Many companies offer simple to sophisticated printing presses. Most of these presses are manual. A few that are industrial-grade-automatic printers require minimal manual labor and increase production significantly.

旋轉絲網印刷

[編輯]

A development of screen printing with flat screens from 1963 was to wrap the screen around to form a tube, with the ink supply and squeegee inside the tube. The resulting roller rotates at the same speed as the web in a roll-to-roll machine. The benefits are high output rates and long rolls of product. This is the only way to make high-build fully patterned printing/coating as a continuous process, and has been widely used for manufacturing textured wallpapers.

示例圖像

[編輯]

參見

[編輯]

參考文獻

[編輯]

閱讀更多

[編輯]
  • Chieffo, Clifford T.: Silk-Screen as a Fine Art : A Handbook of Contemporary Silk-Screen Printing - Reinhold, New York, 1967.
  • 雅各布·比格列森: Screen Printing: A Contemporary Guide. – New-York, 1972.
  • 安迪·麥克杜格爾: Screen Printing Today: The Basics. – ST-Media, Cincinnati, 2008.
  • Guido Lengwiler: A History of Screen Printing. – ST-Media, Cincinnati, 2013.
  • 唐納德·薩夫 和 Deli Sacilotto. Screenprinting: History and Technique. New York: Holt, Rinehart, and Winston, 1979. Print. ISBN 0-03-045491-3

外部鏈接

[編輯]


[[Category:印刷]] [[Category:產業製程]] [[Category:DIY文化]]