模組:Namespace detect
外观
![]() | 此模块被引用於約705,000個頁面。 為了避免造成大規模的影響,所有對此模块的編輯應先於沙盒或測試樣例上測試。 測試後無誤的版本可以一次性地加入此模块中,但是修改前請務必於討論頁發起討論。 模板引用數量會自動更新。 |
This module allows you to output different text depending on the namespace that a given page is in. It is a Lua implementation of the {{namespace detect}} template, with a few improvements: all namespaces and all namespace aliases are supported, and namespace names are detected automatically for the local wiki.
Usage
{{#invoke: Namespace detect | main | page = <!-- page to detect namespace for, if not the current page --> | main = <!-- text to return for the main namespace --> | talk = <!-- text to return for talk namespaces --> <!-- text to return for specific subject namespaces --> | portal = | category = | user = | wikipedia = | wp = | education program = | mediawiki = | book = | timedtext = | template = | special = | media = | file = | image = | help = | module = | other = <!-- text to return for unspecified namespaces --> | demospace = <!-- namespace to display text for --> | subjectns = <!-- set to "yes" to treat talk pages as the corresponding subject page --> }}
Parameters
- main - text to return if the page is in the main namespace.
- talk - text to return if the page is in a talk namespace. This can be any talk namespace - it will match any of "Talk:", "Wikipedia talk:", "User talk:", etc.
- Subject namespace parameters, e.g. wikipedia, user, file... - the text to return if the page is in the corresponding namespace. This module accepts all subject namespaces as parameters, including namespace aliases and virtual namespaces. See below for a list of supported values.
- other - text to return if no parameters for the page's namespace were specified. This text is also returned if
|demospace=
is set to an invalid namespace value. - subjectns - if on a talk page, use the corresponding subject page. Can be set with values of "yes", "y", "true" or "1".
- page - specifies a page to detect the namespace of. If not specified, and if the
|demospace=
parameter is not set, then the module uses the current page. - demospace - force the module to behave as if the page was in the specified namespace. Often used for demonstrations.
Namespace parameters
Possible values for subject namespace parameters are as follows:
Namespace | Aliases |
---|---|
main
|
|
user
|
u , 用户 , 使用者 , 用戶
|
wikipedia
|
project , 维基百科 , 維基百科 , wp , 专案 , 專案
|
file
|
image , 文件 , 档案 , 图像 , 图片 , 檔案 , 圖像 , 圖片
|
mediawiki
|
|
template
|
t , 模板 , 样板 , 樣板
|
help
|
h , 帮助 , 说明 , 使用说明 , 說明 , 幫助 , 使用說明
|
category
|
cat , 分类 , 分類
|
portal
|
p , 主题 , 主題
|
wikiproject
|
pj , wpj , 专题 , 專題 , 维基专题 , 維基專題
|
draft
|
草稿
|
timedtext
|
|
module
|
模块 , 模组 , 模組 , 模塊
|
topic
|
话题 , 話題
|
Table function
Use the following to display a table with the different possible namespace parameters:
{{#invoke:Namespace detect|table|talk=yes}}
To include the parameter for talk namespaces, use |talk=yes
.
Porting to different wikis
This module is designed to be portable. To use it on a different wiki, all you need to do is to change the values in the "cfg" table.
上述文档嵌入自Module:Namespace detect/doc。 (编辑 | 历史) 编者可以在本模块的沙盒 (创建 | 镜像)和测试样例 (创建)页面进行实验。 本模块的子页面。 |
--[[
--------------------------------------------------------------------------------
-- --
-- NAMESPACE DETECT --
-- --
-- This module implements the {{namespace detect}} template in Lua, with a --
-- few improvements: all namespaces and all namespace aliases are supported, --
-- and namespace names are detected automatically for the local wiki. The --
-- module can also use the corresponding subject namespace value if it is --
-- used on a talk page. Parameter names can be configured for different wikis --
-- by altering the values in the "cfg" table in --
-- Module:Namespace detect/config. --
-- --
--------------------------------------------------------------------------------
--]]
local data = mw.loadData('Module:Namespace detect/data')
local argKeys = data.argKeys
local cfg = data.cfg
local mappings = data.mappings
local yesno = require('Module:Yesno')
local mArguments -- Lazily initialise Module:Arguments
local mTableTools -- Lazily initilalise Module:TableTools
local ustringLower = mw.ustring.lower
local p = {}
local function fetchValue(t1, t2)
-- Fetches a value from the table t1 for the first key in array t2 where
-- a non-nil value of t1 exists.
for i, key in ipairs(t2) do
local value = t1[key]
if value ~= nil then
return value
end
end
return nil
end
local function equalsArrayValue(t, value)
-- Returns true if value equals a value in the array t. Otherwise
-- returns false.
for i, arrayValue in ipairs(t) do
if value == arrayValue then
return true
end
end
return false
end
function p.getPageObject(page)
-- Get the page object, passing the function through pcall in case of
-- errors, e.g. being over the expensive function count limit.
if page then
local success, pageObject = pcall(mw.title.new, page)
if success then
return pageObject
else
return nil
end
else
return mw.title.getCurrentTitle()
end
end
-- Provided for backward compatibility with other modules
function p.getParamMappings()
return mappings
end
local function getNamespace(args)
-- This function gets the namespace name from the page object.
local page = fetchValue(args, argKeys.demopage)
if page == '' then
page = nil
end
local demospace = fetchValue(args, argKeys.demospace)
if demospace == '' then
demospace = nil
end
local subjectns = fetchValue(args, argKeys.subjectns)
local ret
if demospace then
-- Handle "demospace = main" properly.
if equalsArrayValue(argKeys.main, ustringLower(demospace)) then
ret = mw.site.namespaces[0].name
else
ret = demospace
end
else
local pageObject = p.getPageObject(page)
if pageObject then
if pageObject.isTalkPage then
-- Get the subject namespace if the option is set,
-- otherwise use "talk".
if yesno(subjectns) then
ret = mw.site.namespaces[pageObject.namespace].subject.name
else
ret = 'talk'
end
else
ret = pageObject.nsText
end
else
return nil -- return nil if the page object doesn't exist.
end
end
ret = ret:gsub('_', ' ')
return ustringLower(ret)
end
function p._main(args)
-- Check the parameters stored in the mappings table for any matches.
local namespace = getNamespace(args) or 'other' -- "other" avoids nil table keys
local params = mappings[namespace] or {}
local ret = fetchValue(args, params)
--[[
-- If there were no matches, return parameters for other namespaces.
-- This happens if there was no text specified for the namespace that
-- was detected or if the demospace parameter is not a valid
-- namespace. Note that the parameter for the detected namespace must be
-- completely absent for this to happen, not merely blank.
--]]
if ret == nil then
ret = fetchValue(args, argKeys.other)
end
return ret
end
function p.main(frame)
mArguments = require('Module:Arguments')
local args = mArguments.getArgs(frame, {removeBlanks = false})
local ret = p._main(args)
return ret or ''
end
function p.table(frame)
--[[
-- Create a wikitable of all subject namespace parameters, for
-- documentation purposes. The talk parameter is optional, in case it
-- needs to be excluded in the documentation.
--]]
-- Load modules and initialise variables.
mTableTools = require('Module:TableTools')
local namespaces = mw.site.namespaces
local cfg = data.cfg
local useTalk = type(frame) == 'table'
and type(frame.args) == 'table'
and yesno(frame.args.talk) -- Whether to use the talk parameter.
-- Get the header names.
local function checkValue(value, default)
if type(value) == 'string' then
return value
else
return default
end
end
local nsHeader = checkValue(cfg.wikitableNamespaceHeader, 'Namespace')
local aliasesHeader = checkValue(cfg.wikitableAliasesHeader, 'Aliases')
-- Put the namespaces in order.
local mappingsOrdered = {}
for nsname, params in pairs(mappings) do
if useTalk or nsname ~= 'talk' then
local nsid = namespaces[nsname].id
-- Add 1, as the array must start with 1; nsid 0 would be lost otherwise.
nsid = nsid + 1
mappingsOrdered[nsid] = params
end
end
mappingsOrdered = mTableTools.compressSparseArray(mappingsOrdered)
-- Build the table.
local ret = '{| class="wikitable"'
.. '\n|-'
.. '\n! ' .. nsHeader
.. '\n! ' .. aliasesHeader
for i, params in ipairs(mappingsOrdered) do
for j, param in ipairs(params) do
if j == 1 then
ret = ret .. '\n|-'
.. '\n| <code>' .. param .. '</code>'
.. '\n| '
elseif j == 2 then
ret = ret .. '<code>' .. param .. '</code>'
else
ret = ret .. ', <code>' .. param .. '</code>'
end
end
end
ret = ret .. '\n|-'
.. '\n|}'
return ret
end
return p